Projecta IC2500- 12v 7 Stage Auto Switchmode Battery Charger (25 amp)

7-stage charging is a very comprehensive, accurate charging technique. FEATURES: 7 Stage Charging- Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers. Multi Chemistry- The multi chemistry function allows you to set the charging profile to suit the battery's chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life. Adjustable Current- Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries. Power Supply- In the larger models (25, 35, 50A, 8A/24V), power supply operates as a float charge (constant voltage) and is ideal for maintaining a battery while running an appliance or load from the battery without risk of overcharging the battery. User Friendly Controls- All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger's performance. What's more, the chargers remember the last settings used even when the power has been turned off. Temperature Compensation- The temperature sensor monitors the battery temperature and adjusts (compensates) the charger's output to prevent overcharging. This is ideal for batteries used in warmer climates or environments. Short Circuit Protection- Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode. Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times. Shock Proof & Dust Proof- Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard. In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations. SPECIFICATIONS: TYPE 7 stage INPUT 240VAC, 50Hz INPUT POWER 792W OUTPUT VOLTAGE 12V OUTPUT CURRENT 2,6,12,25A MINIMUM START VOLTAGE 2.5A BACK DRAIN 1mA CHARGE CONTROL: DESULPHATION High Frequency Pulse charge up to 11V SOFT START Half the rated set current up to 12V BULK Set current up to: 14.1V (GEL) 14.4V (AGM) 14.7V (WET) 14.7V (CALCIUM) ABSORPTION Constant voltage until current drops to: 2 Amp settings: 0.3A 6 Amp setting: 0.9A 12 Amp settings: 1.8A 25 Amp settings: 3.75A EQUALIZATION Contact current (2.0-3.75A) up to 16V then hold for 1 hour or 12 hour timeout ANALYSIS Monitors battery for 90 sec RECONDITION Contant current (0.3-3.75A) for 4 hours limited to: 14.1V (GEL) 14.4V (AGM) 16V (WET) 16V (CALCIUM) FLOAT 13.7V POWER SUPPLY: SETVOLTAGE 13.8V MAXIMUM CURRENT 25A BATTERY RANGE: DEEP CYCLE 14-500Ah AUTOMOTIVE 80-3000CCA MARINE 110-4200MCA TYPES OF BATTERIES Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM SIZE (MM) 210x81x168 WEIGHT 2.0Kg Remote Sold Separately