{"id":3226,"date":"2013-06-15T14:28:51","date_gmt":"2013-06-15T02:28:51","guid":{"rendered":"https:\/\/www.abtec.co.nz\/blog\/?p=3226"},"modified":"2015-06-30T07:13:36","modified_gmt":"2015-06-29T19:13:36","slug":"digital-designs-cm600-mono-block-product-review","status":"publish","type":"post","link":"https:\/\/abtec.co.nz\/blog\/digital-designs-cm600-mono-block-product-review\/","title":{"rendered":"Digital Designs CM600 Mono-Block Product Review"},"content":{"rendered":"

The Digital Designs CM600<\/a><\/strong> is Digital Designs<\/strong>‘ entry level Mono-Block Amplifier<\/strong> and I use the term “entry level” loosely, 350w RMS @ 4ohm<\/strong> & 600w RMS @ 2ohm<\/strong> may be entry level for Digital Designs<\/strong> but for some other (that I will not name due to respect) car audio brands 600w RMS<\/strong> is a monstrous amount of power for their factory made subwoofers.<\/p>\n

 <\/p>\n

\"\"<\/a><\/p>\n

As usual with the Digital Designs<\/strong> amplifiers the CM600<\/strong> has nice and simple design with the casing which is a good thing in my opinion, the nice and sleek black anodised aluminium casing makes for a good heat-sink as well as looking stealth enough for the most subtle of installs.<\/p>\n

Here at ABTEC<\/strong> we have a CM600<\/strong> on a comparator board (Sound-Board) with a SS4a<\/strong> and SS1b<\/strong> mounted above it and because of this beautifully simple casing design all three of them look like they all belong. This to me is important as when I have an install done I like it to look as clean as possible and allowing the different series amplifiers to have a similar look\/design allows people to make their installs as clean as possible.<\/p>\n

\"\"<\/a><\/p>\n

With 350w RMS @ 4ohms<\/strong> & 600w RMS @ 2ohms<\/strong> the CM600<\/strong> is the perfect Mono-Block<\/strong> to power a Digital Designs DD-LE-MINI08<\/strong> or even two of them! At the moment on the comparator board we have a CM600<\/strong> powering 4 x DD-SW6.5’s<\/strong>, DD-512-D4<\/strong>, DD-510-D4<\/strong>, JBL GTO1214D<\/strong>,\u00a0Infinity Kappa 122.7<\/strong> & a\u00a0Infinity REF1260W<\/strong> via a switch board which is pushing at least one of these for a minimum of twelve hours a day without any issues!<\/p>\n

\"\"<\/a><\/p>\n

SPECIFICATIONS<\/strong><\/p>\n